Philips 10BDL3051T - Clone Media Files Transfer Process; Cloning Media Files from SD;USB; 3.2 Android Launcher Interface; Admin Mode Access and Functions

10BDL3051T
9
3.1.5 Clone Media Files into internal
(1) Clone media files from SD
After cloning, it will jump to 6.1 Import Clone Data .
(2) Clone media files from USB
After cloning, it will jump to 6.1 Import Clone Data .
3.1.6 Setup Complete
When you click “Finish”, it will start “Import” or
“Clone Data”.
If it runs “Import”, it will show 6.1 Import Clone
Data .
Otherwise it will show 6.2 Manual Setup Complete .
PS: Do not power off during “Import” and “Clone”
processes, otherwise it will cause data loss.
(1) Import Clone Data
Click “Finish”, run “Import data”, it will re-boot
automatically.
(2) Manual Setup Complete
After finishing manual setup, you can enter Admin
Mode to change settings in the future if necessary.
3.2 Android Launcher
3.2.1. Platform launcher
Platform launcher is black page as below:
By pressing back key you can exit the app, the
screen will go to platform launcher.
3.2.2. Admin mode:
You can press “Menu + V-” to enter Admin mode.
Admin mode will show 4 icons: “Settings”, “Apps”,
“Network” and “Help”.
When you exit from Admin mode, the system will go
back to boot on source.