Philips 10BDL3051T - Static IP Configuration Details; Manual IP Address Entry Steps; 3.3.6 Signage Display Configuration; General Signage Display Settings

10BDL3051T
12
Static IP
In Static IP mode, the user can enter IP Address,
Netmask, DNS Address, and Gateway manually.
PS: Format of IP Address, Netmask, DNS Address,
and Gateway Address:
* Numbers: 0-9
* Decimal point “.”
3.3.4 Bluetooth
You can switch OFF or ON Bluetooth.
After switching ON, it will show the device name
and all available devices.
3.3.5 More
Setup Tethering & portable hotspot
Setup Bluetooth tethering
* Enable : Sharing this Signage Display‟s Internet
connection.
* Disable : Not sharing this Signage Display‟s
Internet connection.
3.3.6 Signage Display
There are 4 different groups: General Settings /
Server Settings / Source Settings / Security
(1) General Settings
* Signage Display Name
* Monitor ID
* Boot Logo
* Boot on source
* Schedule
* Screenshot
(2) Server Settings
* Email Notification
* FTP
* Remote Control
(3) Source Settings
* Media Player
* Browser
* SmartCMS
* PDF Player