Philips 190B8CS/00 - 96 18. General Product Specification; General Product Specification

96
HUDSON 8
18. General Product Specification
CONTENTS
1 FOREWORD
2 PRODUCT PROFILE
2.1 LCD
2.2 SCANNING FREQUENCIES
2.3 AMBIENT TEMPERATURE: 0 °C - 35 °C
3 ELECTRICAL CHARACTERISTICS
3.1 INTERFACE SIGNALS
3.2 INTERFACE
3.3 TIMING REQUIREMENT
3.4 HORIZONTAL SCANNING
3.5 VERTICAL SCANNING
3.6 POWER INPUT CONNECTION
3.7 POWER MANAGEMENT
3.8 ANALOG DISPLAY IDENTIFICATION
3.9 DVI-D DISPLAY IDENTIFECATION
3.10 USB PLUG SUPPORT
3.11 DDC/CI SUPPORT
3.12 EDID
3.13 HOT-KEY DEFINITION
3.14 SMART BRIGHT-DYNAMIC BRIGHTNESS CONTROL (DBC) (NOT REQUIRED FOR THIS PRODUCT)
3.15 SMART CONTRAST (DYNAMIC CONTRAST RATIO)
3.16 SMART IMAGE
3.17 SMART RESPONSE (NOT REQUIRED FOR THIS PRODUCT)
4 VISUAL CHARACTERISTICS
4.1 TEST CONDITIONS
4.2 BRIGHTNESS
4.3 IMAGE SIZE
4.4 BRIGHTNESS UNIFORMITY
4.5 CHECK CROSS TALK (S)
4.6 WHITE COLOR ADJUSTMENT
5 MECHANICAL CHARACTERISTICS
5.1 COSMETIC PHILIPS ID
5.2 MECHANICAL DATAFILES PROE FILES REQUIRED
5.3 LOCATION OF PHILIPS LOGO PER PHILIPS MAKE-UP SHEET
5.4 GAP BETWEEN PANEL AND FRONT BEZEL <0.8 (TYP) MM
5.5 LOCATION OF CONTROL ICONS PER PHILIPS GRAPHIC SHEET
5.6 COLOR FOR RESIN/PAINT PER PHILIPS MAKE-UP SHEET
5.7 RESINS
http://www.wjel.net