ʳ
ʳ
ʳ
ˉˋ
241B4LPY LCD
ʳ
General Product Specification
ʳ
Standby Off Off Blanked < 0.2W
Blinking white
LED
Period 1sec on
3sec off
< 3 s
DC Power Off N/A < 0.2W LED Off
3.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B,
DDC/CI, and EDID V1.3.
3.10 Display port identification
3.11 USB support
(option , refer to Quick specification table)
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach
external device to the downstream port of the monitor. Check if the device can work properly.
3.12 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with
Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least.
3.13 Pivot function (option , refer to Quick specification table)
It needs to support AUTO PIVOT function with SmartControl PC application tool.
3.14 Hot-key definition
ˠˇʳˢ˦˗ʳ˕ʳ
˷˸˹˼˼˼ʳ˲ʳ˅˃˄˄˃ˉ˃
3.15 Smart Image
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ
˦˴˜˴˺˸ʳˣ˹˼˿˸ʳ
˗˸˹˼˼˼ʻˠˆʼ
ʳ
3.16 PerfectTune II (formerly FGA, FACTORY GAMMA Alignment)
A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scaler embedded patterns.
To Next Page
Loading...
