Philips 241B4PYCS/00 - Plastics Flammability; Texture;Glossing of Housing; Tilt and Swivel Base; Kensington Lock

ʳ
ʳ
ʳ
ˊ˅
241B4LPY LCD
ʳ
General Product Specification
ʳ
x China RoHS mark requested.
5.11 Plastics flammability
x All Plastics to be Flame Retardant UL 94-HB or Better.
x Base / Pedestal to be Flame Retardant UL 94-HB.
x All major plastic parts (bezel, back cover) need to be molded from same resin.
x Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.12 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.
x Philips must approve the mold texturing.
x Detail document for texture refer to “UN-D249”, “UN-D 600”.
x Glossy surface > = 80 gloss units
5.13 Tilt and swivel base
x Tilt angle : -5 q +2/- 0 q (forward)
+20 q+ 0/- 3 q (backward)
x Swivel angle : nil
x High Adjustment : nil
x Portrait Display : nil
5.14 Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kensington hole.
5.15 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 )
241S4L/241S4LA
x Unit dimension : 437*565*207
x Packed unit dimension: 476*605*139 mm (WW)
x Net weight : 5.3kg
x Gross weight : 6.8kg
241S4LY/241S4LC/241B4LP/241B4LPY
x Unit dimension : 403*565*227
x Packed unit dimension: 405*624*172 mm (WW)
x Net weight : 6.3 kg
x Gross weight : 8.3 kg