14
Use timers
You can set timers to switch the TV to standby
at a specifi ed time.
Tip
Set the TV clock before you use timers. •
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defi ned period of time.
Tip
You can switch off your TV earlier or reset the •
sleep timer during the countdown.
1 Press ( Home ).
2 Press to select [Setup] >
[Features] > [Sleep timer] .
The » [Sleep timer] menu appears.
3 Press to set the sleep time.
The sleep timer can be up to 180 »
minutes in steps of fi ve minutes. If set
to zero, the sleep timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the »
specifi ed time.
Change the time zone
1 Press ( Home ).
2 Press to select [Setup] >
[Installation] > [Clock] > [Time zone] .
3 Press to select your time zone.
4 Press OK to confi rm.
Note
This option is only available if you select • [Auto
clock] > [Automatic] (In countries with clock
transmission data).
Set the time
1 Press ( Home ).
2 Press to select [Setup] >
[Installation] > [Clock] > [Time] .
3 Press and OK to enter the date.
4 Select [Done] , then press OK to confi rm.
Display the TV clock
1 When watching TV, press OPTIONS .
The TV option menu appears. »
2 Select [Clock] .
3 Press OK .
Note
To disable the clock, repeat the above •
procedure.
Tip
you can also press • CLOCK on the remote
control to display the TV clock.
EN
Dali_78_EN.indd 14Dali_78_EN.indd 14 1/14/2010 10:13:13 AM1/14/2010 10:13:13 AM
To Next Page
Loading...
