18
Step 3 Automatically update TV
software
Caution
Do not disconnect the USB storage device •
from the TV during the software update.
If a power failure occurs during the update, do
•
not remove the USB storage device from the
TV. The TV will continue the update as soon
as power comes back.
1 Connect the USB storage device to the
TV.
An on-screen message prompts you to »
update your TV software.
2 Select [Update] .
3 Select [Start] .
4 Follow the on-screen instructions to
update the TV software.
5 Once complete, press OK to restart the
TV.
Manually update TV software
1 If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates] >
[USB] .
2 Press OK to update the TV software
manually.
3 Follow the on-screen instructions to
complete the update.
4 Once complete, press OK to restart the
TV.
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1 Press ( Home ).
2 Select [Setup] > [Software update] >
[Current software] .
The TV displays the current software »
information.
Step 1 Download the TV identifi cation
fi le
1 Press ( Home )
2 Select [Setup] > [Software update] >
[Update assistant] > [Action] .
3 Select [Start] .
4 Follow the on-screen instructions to
download the TV identifi cation fi le to the
USB storage device.
Step 2 Download the latest software
1 Connect the USB storage device to a
computer with internet connection.
2 Locate and open the fi le update.htm on
your USB storage device.
3 Read the on-screen instructions and click
the Send ID button.
If a new software is available, the update
is downloaded to the USB storage device.
4 Disconnect the USB storage device.
EN
Dali_78_EN.indd 18Dali_78_EN.indd 18 1/14/2010 10:13:14 AM1/14/2010 10:13:14 AM
To Next Page
Loading...
