19
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1 Press ( Home ).
2 Select [Features] > [Demo] .
The » [Demo] menu appears.
3 Press the to select a demo.
• [Digital Crystal Clear] : Adjusts
picture quality to optimal contrast,
color and sharpness.
• [Active Control] : Automatically
adjusts the picture setting for optimal
picture quality continuously under
any signal conditions.
4 Press OK to start the demo.
5 Press ( Home ) to exit demo mode.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1 Press ( Home ).
2 Select [Setup] > [Installation] > [Factory
reset] .
3 Select [Start] , then press OK .
4 Press ( Home ) to exit.
Change TV preferences
Use the preferences menu to customize your
TV settings.
1 Press ( Home ).
2 Select [Setup] > [Installation] >
[Preferences] .
• [Location] : Optimizes TV settings for
your location - home or shop.
• [Volume bar] : Displays the volume
bar when you adjust the volume.
• [Channel info.] : Displays information
about the TV channel every time you
switch channels.
• [EasyLink] : Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [Pixel Plus Link] : Overrides the
settings of connected devices and
uses the settings of the TV.
• [E-sticker] : For shop mode only. Sets
the location of the e-sticker.
3 Press to select your preference.
4 Press OK .
5 Press ( Home ) to exit.
English
EN
Dali_78_EN.indd 19Dali_78_EN.indd 19 1/14/2010 10:13:14 AM1/14/2010 10:13:14 AM
To Next Page
Loading...
