Philips 5000 - CPU Board; KYB Interface and Display

PHI 5000 08 DISASSEMBLY
9/7
7.15. KYB interface and display
Loosen the screws slide the
card o the support and
disconnect the electrical
connections.
Loosen the screw for
remove the cover.
7.13. CPU board
7.14. Programming access for Espresso Philips Service Center (EPSC)
Remove the cover.
Unscrew the screw shown
Press the sides and remove the cover and
dispenser. Insert as before to reassemble the
dispenser in the rail and then the coverage.
Remuve the cap, unscrew the screw
shown and remove the steam tube.
Unscrew the screws shown Remove the insert the upper cover