How to fix a Philips LED TV when no picture is displayed?
If your Philips LED TV shows no picture, check the following: Ensure the power cord is securely plugged in. Verify that the main power switch on the back of the TV is turned on. Confirm that the selected input has a signal connection to the TV.
Why can I hear sound but there is no picture on my Philips 55BDL4050D LED TV?
If you can hear sound but see no picture on your Philips LED TV, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
What to do if my Philips LED TV has picture but no sound?
If you can see a picture but cannot hear any sound on your Philips LED TV, ensure that both the video and audio input cables are correctly connected. Also, check if the volume is turned down or if the mute function is activated. If so, adjust the volume using the volume buttons or switch the mute off. Finally, verify that external speakers are connected and the volume is set appropriately.
Why is my Philips 55BDL4050D picture distorted with abnormal patterns?
A distorted picture with abnormal patterns on your Philips LED TV could be due to a loose signal cable. Make sure the signal cable is firmly attached. Another reason might be that the input signal is beyond the display's capabilities. Check the video signal source to ensure it is within the display's specified range.
How to adjust the screen size on my Philips LED TV to fill the display?
If the display image doesn’t fill the full screen size on your Philips LED TV, the zoom mode may not be set correctly. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune the display geometry and time frequency parameter.
Why does the Philips 55BDL4050D display abnormal colors?
If the color on your Philips LED TV appears abnormal, it could be due to a loose signal cable. Make sure that the signal cable is firmly attached to the back of the display.
What causes interference on my Philips LED TV and how to fix it?
Interference or audible noise on your Philips LED TV might be caused by nearby electrical appliances or fluorescent lights. Try moving the TV to another location to see if the interference is reduced.
How to prevent after-images on my Philips 55BDL4050D screen?
To prevent after-images on your Philips LED TV, avoid displaying still images for extended periods. Prolonged display of static content like logos, video game interfaces, or images in 4:3 normal mode can cause a permanent after-image to remain on the screen.
Why some pixels of Philips LED TV do not light up?
Some pixels on your Philips LED TV may not light up due to the manufacturing process. The display is made with extremely high precision technology, but sometimes some pixels may not display. This is not a malfunction.
Covers precautions for connecting, operating, and maintaining the display, including safety warnings.
Warns about electrostatic discharge effects on equipment and user.
States compliance with EU directives for electromagnetic compatibility and low voltage.
FCC compliance statement and interference guidelines for US users.
Information regarding the device's ability to emit and receive electromagnetic signals.
Specific safety and electrical connection guidance for users in the UK.
Details wire color coding and connection steps for a standard plug.
Regional information regarding placement and ventilation for Nordic countries.
Information on how to dispose of the product responsibly at the end of its life.
Guidelines for disposing of WEEE in European Union households.
Compliance statement regarding hazardous substances and e-waste in India.
Instructions for battery disposal and recycling for different regions.
Instructions for unpacking the display and checking all included items.
Important notes regarding installation, ventilation, and operating altitude.
Step-by-step guide for attaching and detaching the display's table stands.
Instructions for mounting the display on a wall using a standard kit.
Specifies VESA dimensions and guidelines for proper heat dissipation.
Instructions for mounting the display in a portrait orientation.
Guide on using the logo guider and steps to remove the Philips logo sticker.
Instructions for installing the Edge Alignment Kit for multi-display setups.
Details the functions of each button on the display's control panel.
Explains the function of the remote sensor and the power status indicator LED.
Explains the general functions of the remote control buttons.
Details functions of Number/ID SET/ENTER, FORMAT, BACK, INFO, OPTIONS, and VOLUME buttons.
Instructions for setting the remote control ID for multiple displays.
Explains remote control functions when using the Android source.
How to use navigation, OK, ADJUST, MUTE, COLOR, and other buttons in Android.
Guides for inserting batteries, handling the remote, and understanding its operating range.
How to connect DVD, VCR, or VCD players using HDMI.
How to connect a PC to the display via various inputs.
Instructions for connecting a PC via HDMI and DisplayPort inputs.
How to connect external audio devices for sound output.
Connects displays for control (RS232) and digital video (DVI/DisplayPort).
Connects displays for analog video (DVI) and IR signals.
How to select and view the connected video source.
How to adjust the picture format for different video sources.
Introduction to the Android launcher, its default screen, and admin mode access.
How to sort media files within the Media Player.
Media Player settings for repeat mode, effects, hotkeys, and duration.
Guide to using the browser app, including settings and URL management.
How to import and export URL lists into and from the browser.
Sorting PDF files and configuring reader settings for repeat mode and effect duration.
How to delete CMS data and configure the source for automatic download.
How to operate custom apps via the OSD menu.
Introduction to Save, Forget, and Cancel functions for custom apps.
Configuration for display name, boot logo, and screenshots.
How to enable, disable, and configure Wi-Fi and Ethernet connections.
Configuration for display name, boot logo, and screenshots.
How to enable/disable boot logo and configure screenshot settings.
Configuration for email notifications and FTP server settings.
SMTP email configuration for Gmail/other accounts and manager email setup.
Enabling and configuring FTP server settings including account, password, path, and port.
Enabling and configuring remote control server connection and checking bind status.
Editing Media Player playlists/effects and Browser bookmarks.
Setting up SmartCMS and editing PDF Player playlists/effects.
Options for clearing storage and resetting the display to factory defaults.
Functions for importing and exporting display settings.
Displays storage info, application list, and date/time configuration.
Access to Android developer options.
Displays system information like OS version and build number.
How to perform system updates via USB or SD card.
How to rotate the display orientation (Landscape/Portrait).
Steps for navigating the OSD menu using the remote or display buttons.
A general overview of the OSD menu structure.
Adjusts overall image and background screen brightness.
Adjusts the image contrast ratio.
Enhances image crispness and detail.
Adjusts the image brightness for the background.
Adjusts the color tint of the screen.
Adjusts the color depth and intensity.
Reduces noise in the image.
Selects display gamma for brightness performance curve.
Adjusts the color temperature of the display.
Adjusts the color levels of red, green, and blue.
Sets picture quality presets for PC and Video modes.
Automatically adjusts backlight based on content.
Controls power saving features and brightness.
Adjusts the display area of the image.
Resets all picture settings to factory defaults.
Adjusts horizontal/vertical position, clock width, and phase for VGA input.
Selects picture aspect ratio and allows custom zoom adjustments.
Automatically adjusts screen settings and resets them to factory defaults.
Adjusts volume, line out level, max/min volume, mute, and audio source.
Resets all audio settings to factory defaults.
Selects PIP sub-mode, adjusts sub-picture size, and sets its position.
Exchanges signals, selects input, and chooses audio source for PIP.
Resets all PIP menu settings to factory defaults.
Settings for switch-on state, panel saving, RS232 routing, and boot source.
Sets OSD turn off timer, position, transparency, and information display time.
Enables or disables the display of the logo on startup.
Sets VGA input resolution and selects the remote control operation mode.
Enables/disables control buttons and configures multi-display tiling.
Adjusts tiling frame compensation, brightness, and sets the off timer.
Adjusts the display's internal clock and programs scheduled activations.
Configures HDMI One Wire, CEC, and automatic signal source detection.
Configures power saving modes for the display.
Tables detailing supported resolutions and their specifications.
Notes on optimal PC text display and connection troubleshooting.
Defines pixels, sub-pixels, categorizes defects, and defines a 'dot' defect.
Describes defects where pixels are always lit ('on').
Describes dark defects and specifies tolerances for defect proximity.
Lists acceptable defect levels and explains the Mura phenomenon.
Instructions for safely cleaning the display's front panel and cabinet.
Provides solutions for common display issues like no picture, noise, or distorted images.
Lists detailed specifications for the display panel itself.
Details the specifications for all input and output ports.
General specifications including memory, power, dimensions, and weight.
Operational conditions and specifications for internal speakers.
Covers precautions for connecting, operating, and maintaining the display, including safety warnings.
Warns about electrostatic discharge effects on equipment and user.
States compliance with EU directives for electromagnetic compatibility and low voltage.
FCC compliance statement and interference guidelines for US users.
Information regarding the device's ability to emit and receive electromagnetic signals.
Specific safety and electrical connection guidance for users in the UK.
Details wire color coding and connection steps for a standard plug.
Regional information regarding placement and ventilation for Nordic countries.
Information on how to dispose of the product responsibly at the end of its life.
Guidelines for disposing of WEEE in European Union households.
Compliance statement regarding hazardous substances and e-waste in India.
Instructions for battery disposal and recycling for different regions.
Instructions for unpacking the display and checking all included items.
Important notes regarding installation, ventilation, and operating altitude.
Step-by-step guide for attaching and detaching the display's table stands.
Instructions for mounting the display on a wall using a standard kit.
Specifies VESA dimensions and guidelines for proper heat dissipation.
Instructions for mounting the display in a portrait orientation.
Guide on using the logo guider and steps to remove the Philips logo sticker.
Instructions for installing the Edge Alignment Kit for multi-display setups.
Details the functions of each button on the display's control panel.
Explains the function of the remote sensor and the power status indicator LED.
Explains the general functions of the remote control buttons.
Details functions of Number/ID SET/ENTER, FORMAT, BACK, INFO, OPTIONS, and VOLUME buttons.
Instructions for setting the remote control ID for multiple displays.
Explains remote control functions when using the Android source.
How to use navigation, OK, ADJUST, MUTE, COLOR, and other buttons in Android.
Guides for inserting batteries, handling the remote, and understanding its operating range.
How to connect DVD, VCR, or VCD players using HDMI.
How to connect a PC to the display via various inputs.
Instructions for connecting a PC via HDMI and DisplayPort inputs.
How to connect external audio devices for sound output.
Connects displays for control (RS232) and digital video (DVI/DisplayPort).
Connects displays for analog video (DVI) and IR signals.
How to select and view the connected video source.
How to adjust the picture format for different video sources.
Introduction to the Android launcher, its default screen, and admin mode access.
How to sort media files within the Media Player.
Media Player settings for repeat mode, effects, hotkeys, and duration.
Guide to using the browser app, including settings and URL management.
How to import and export URL lists into and from the browser.
Sorting PDF files and configuring reader settings for repeat mode and effect duration.
How to delete CMS data and configure the source for automatic download.
How to operate custom apps via the OSD menu.
Introduction to Save, Forget, and Cancel functions for custom apps.
Configuration for display name, boot logo, and screenshots.
How to enable, disable, and configure Wi-Fi and Ethernet connections.
Configuration for display name, boot logo, and screenshots.
How to enable/disable boot logo and configure screenshot settings.
Configuration for email notifications and FTP server settings.
SMTP email configuration for Gmail/other accounts and manager email setup.
Enabling and configuring FTP server settings including account, password, path, and port.
Enabling and configuring remote control server connection and checking bind status.
Editing Media Player playlists/effects and Browser bookmarks.
Setting up SmartCMS and editing PDF Player playlists/effects.
Options for clearing storage and resetting the display to factory defaults.
Functions for importing and exporting display settings.
Displays storage info, application list, and date/time configuration.
Access to Android developer options.
Displays system information like OS version and build number.
How to perform system updates via USB or SD card.
How to rotate the display orientation (Landscape/Portrait).
Steps for navigating the OSD menu using the remote or display buttons.
A general overview of the OSD menu structure.
Adjusts overall image and background screen brightness.
Adjusts the image contrast ratio.
Enhances image crispness and detail.
Adjusts the image brightness for the background.
Adjusts the color tint of the screen.
Adjusts the color depth and intensity.
Reduces noise in the image.
Selects display gamma for brightness performance curve.
Adjusts the color temperature of the display.
Adjusts the color levels of red, green, and blue.
Sets picture quality presets for PC and Video modes.
Automatically adjusts backlight based on content.
Controls power saving features and brightness.
Adjusts the display area of the image.
Resets all picture settings to factory defaults.
Adjusts horizontal/vertical position, clock width, and phase for VGA input.
Selects picture aspect ratio and allows custom zoom adjustments.
Automatically adjusts screen settings and resets them to factory defaults.
Adjusts volume, line out level, max/min volume, mute, and audio source.
Resets all audio settings to factory defaults.
Selects PIP sub-mode, adjusts sub-picture size, and sets its position.
Exchanges signals, selects input, and chooses audio source for PIP.
Resets all PIP menu settings to factory defaults.
Settings for switch-on state, panel saving, RS232 routing, and boot source.
Sets OSD turn off timer, position, transparency, and information display time.
Enables or disables the display of the logo on startup.
Sets VGA input resolution and selects the remote control operation mode.
Enables/disables control buttons and configures multi-display tiling.
Adjusts tiling frame compensation, brightness, and sets the off timer.
Adjusts the display's internal clock and programs scheduled activations.
Configures HDMI One Wire, CEC, and automatic signal source detection.
Configures power saving modes for the display.
Tables detailing supported resolutions and their specifications.
Notes on optimal PC text display and connection troubleshooting.
Defines pixels, sub-pixels, categorizes defects, and defines a 'dot' defect.
Describes defects where pixels are always lit ('on').
Describes dark defects and specifies tolerances for defect proximity.
Lists acceptable defect levels and explains the Mura phenomenon.
Instructions for safely cleaning the display's front panel and cabinet.
Provides solutions for common display issues like no picture, noise, or distorted images.
Lists detailed specifications for the display panel itself.
Details the specifications for all input and output ports.
General specifications including memory, power, dimensions, and weight.
Operational conditions and specifications for internal speakers.
General| Panel life | - h |
|---|---|
| Pixel pitch | 0.63 x 0.63 mm |
| Response time | 12 ms |
| Display diagonal | 54.64 \ |
| Display brightness | 450 cd/m² |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Supported video modes | 480i, 480p, 576i, 576p, 720i, 720p, 1080i, 1080p |
| Contrast ratio (dynamic) | 500000:1 |
| Contrast ratio (typical) | 1100:1 |
| Display number of colors | 16.78 million colors |
| Display diagonal (metric) | 138.8 cm |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1366 x 768, 1440 x 900 (WXGA+), 1920 x 1080 (HD 1080) |
| AUX in | Yes |
| RS-232 output ports | 1 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 76 W |
| Compatible memory cards | MicroSD (TransFlash) |
| VGA (D-Sub) input ports | 0 |
| Orientation | Horizontal/Vertical |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (side) | 9.5 mm |
| Bezel width (bottom) | 15.6 mm |
| Panel mounting interface | 400 x 400 mm |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| RMS rated power | 20 W |
| Cables included | AC, RS-232 |
| Internal memory | 2 GB |
| Processor cores | 4 |
| Processor model | A9 |
| Processor family | ARM Cortex |
| Processor frequency | 1.8 GHz |
| Audio formats supported | AAC, AIFF, ASF, LPCM, M4A, MP3, MP4, WAV, WMA |
| Image formats supported | BMP, GIF, JPG |
| Video formats supported | M2TS, M4V, MKV, MP4, MPEG, MPG, MTS, TS, VOB, WMV |
| Internal storage capacity | 16 GB |
| Operating system installed | Android |
| Number of OSD languages | 18 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CHI (TR), DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, NOR, POL, POR, RUS, SWE, TUR |
| Sustainability certificates | RoHS, ENERGY STAR |
| Certification | CE, FCC, Class B, UL/cUL, CCC, C-Tick, GOST, BSMI, CB, J-Moss, PSE, VCCI |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 45.72 mm |
|---|---|
| Width | 1231.9 mm |
| Height | 711.2 mm |
| Weight | 18000 g |
To Next Page