Philips AC3055/50 - Turning on and off; Changing the Day Mode Setting

7EN
English

AeraSense sensing technology accurately detects and
quickly responds to even the slightest particle change in
the air. It provides you with reassurance with real-time
PM2.5 feedback.
Most of the indoor air pollutants fall under PM2.5 –
which refers to airborne particle pollutants smaller
than 2.5 micrometers. Common indoor sources of ne
particles are tobacco smoke, cooking, burning candles.
Some airborne bacteria and the smallest mold spores, pet
allergen and dust mite allergen particles also fall under PM2.5.
GAS
With an advanced gas sensor, a display ranging from L1 to
L4 shows the level change of potential harmful gases (incl.
VOC, odor, etc.) detected. L1 indicates best air quality.

Note:
•
For optimum purication performance, close doors and windows.
•
Keep curtains away from the air inlet or air outlet.
1 Put the plug of the air purier in the power socket.
2 Touch to switch on the air purier.
» The air purier beeps.
» The “ ” displays on the screen during warming up. Then the air purier shows the IAI/
PM2.5/Gas level after measuring the air quality.
» The air purier operates in the auto mode with PM2.5 displayed on the screen (g h).
3 Touch and hold the button for 3 seconds to switch o the air purier.
Note: If the air purier stays connected to the electrical outlet after turning OFF, the air purier will
operate under the previous settings when turned ON again.
Changing the day mode setting
You can choose Auto mode, speed 1, speed 2 or Turbo mode by touching the button.
  In Auto mode, the dual-sensor senses the air quality in real-time and the appliance
automatically adjusts the fan speed in accordance with the ambient air quality. The control panel can
automatically adjust display screen brightness according to the ambient light (g i).
 &  In manual mode, the air purier operates on speed 1 or speed 2 (g j).
  In Turbo mode, the air purier operates on the highest speed (g k).
 Air quality light color
≤12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red
Gas level Air quality light color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red