Philips AC3055/50 - Filter Reset; Storage

11EN
English
5 Put the new lter into the appliance (g f).
6 Reattach the back cover (g g).
7 Put the plug of the air purier in the power socket.
8 Touch the button to switch on the appliance.
9 Touch and hold the lter status check/reset button for 3 seconds to reset the lter lifetime
counter.
10 Wash your hands thoroughly after replacing the lter.
Note: Do not smell the lter as it has collected pollutants from the air.

You can replace the lter even before lter replacement alert ( ) displays on the screen. After
replacing a lter, you need to reset the lter lifetime counter manually.
1 Touch the power button for 3 seconds to turn o the appliance and unplug from power socket.
2 Put the power plug in the power socket (g {).
3 Within 15 seconds after power on, touch and hold and button for 3 seconds to reset the
lter lifetime counter (g |).
6 Storage
1 Turn o the air purier and unplug from the power socket.
2 Clean the air purier, particle sensor and the surface of the lter (see chapter “Cleaning and
maintenance”).
3 Let all parts air dry thoroughly before storing.
4 Wrap the lter in air tight plastic bags.
5 Store the air purier, lter in a cool, dry location.
6 Always thoroughly wash hands after handling the lter.