Philips AC3055/50 - Cleaning and Maintenance; Cleaning Schedule; Cleaning the Body of the Air Purifier; Cleaning the Particle Sensor

9EN
English
5 Cleaning and maintenance
Note:
•
Always unplug the appliance before you clean it.
•
Never immerse the appliance in water or any other liquid.
•
Never use abrasive, aggressive, or ammable cleaning agents such as bleach or alcohol to clean any
part of the appliance.
•
Never use any liquids (including water) to clean the lter.
•
Do not attempt to clean the particle sensor and gas sensor with a vacuum cleaner.
Cleaning schedule
 Cleaning method
When necessary
Wipe the surface of the appliance with a soft dry cloth
Clean the air outlet cover
Every two months Clean the particle sensor with a dry cotton swab
The displays on the
screen.
Clean the surface of the lter

Regularly clean the inside and outside of the air purier to prevent dust from collecting.
1 Use a soft, dry cloth to clean both the interior and exterior of the air purier.
2 The air outlet can also be cleaned with a dry, soft cloth.
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the appliance.
Note:
•
If the air purier is used in a dusty environment, it may need to be cleaned more often.
•
If the humidity level in the room is very high, condensation may develop on the particle sensor and
the air quality light may indicate a more poor air quality even though the air quality is actually good.
If this occurs, clean the particle sensor.
1 Switch o the air purier and unplug from the power socket.
2 Pull the back cover and remove it from the appliance (g c).
3 Clean the particle sensor with a damp cotton swab (g v).
4 Dry all parts thoroughly with a dry cotton swab.
5 Reattach the back cover (g g).