Philips AC3858 - Wi-Fi Connection

27EN
Wi-Fi connection
Note:
• If you want to connect more than one air purier to your smart device, you
have to do this one by one� Complete the set up of one appliance before you
turn on the other appliance�
• Make sure the distance between your air purier and Wi-Fi router is less than
10m without any obstruction�
• If the air purier installed at room corner has a weak Wi-Fi signal, it's
recommended to set Wi-Fi booster for remote usage�
1 Scan the QR code, or download the "JD Whale" App
from App market, and then install the App in your
smart device�
2 Make sure your smart device is connected to your
Wi-Fi network� Launch the App�
3 Tap "+" , scan the QR code from the user manual or
packing box�
4 Make sure that the Wi-Fi indicator blinks orange�
Tap Next�
Note:
• If the Wi-Fi indicator is not in orange, touch and to enter pairing
mode�
5 Fill the Wi-Fi information and tap Next to add a new device�
6 After the successful pairing and connection, tap Finish�
The Wi-Fi indicator will light up white�
7 If you want to add more smart device to connect with this air purier, tap
Settings on the top right of the App� Tap Share with family to scan the
generated QR code�
8 On the device which you want to connect to this appliance, download and
install the "JD Whale" App, scan this QR code and follow step 1-6 to add
more device�
9 If the connection fails or Wi-Fi inforamtion is changed, follow step 1-6 to
reconnect the Wi-Fi network�
Scan the QR code to
download JD Whale App
Use your JD account to
login the App