Philips AC3858 - Switching the Display Indicator; Using the Light On;Off Function

30 EN
Sleep Mode
Sleep mode ( )
In Sleep mode, the air purier operates quietly at
a low speed� After 3 seconds, the screen lights o�
Switching the display indicator
Note: The PM2�5 level is displayed on the central of the screen by default�
1 Touch the button once to switch the display indicator�
2 Touch and hold the button for 3 seconds to check the explaination of
PM2�5/Gas/ IAI level�
Using the light on/o function
With the light sensor, the control panel can automatically turn on, turn o or
dim according to the ambient light� The control panel will be o or dim when
the ambient light is dark� You can touch any button to wake up all lights� Then,
if no further operation, all lights will be o or dim again to match with the
ambient light�
You can touch the light on/o button manually to turn o all lights and the
control pa nel� Touch any button to wake up all lights�
IAI Gas
2
PM2.5
3s
Particulate
Matter 2.5
IAI Gas
2
PM2.5
1 2