Philips AC3858 - Cleaning the Surface of the Filter

33EN
Cleaning the surface of the lter
Filter alert light status Action
The lter cleaning alert
displays on the screen
Clean the surface of the lter with a vacuum
1 Switch o the air purier and unplug from the power socket�
2 3 4 5 6
2 Pull the back cover and remove it from the appliance�
3 Pull the lter from the appliance�
4 Clean the surface of the lter with a vacuum�
5 Put the lter back into the appliance�
6 Reattach the back cover�
7 Put the plug of the air purier in the power socket�
8 Touch the button to switch on the appliance�
9 Touch and hold the lter status check/reset button
for 3 seconds to reset the lter cleaning time�
» The screen displays a message "Filter cleaning
completed"�
10 Wash your hands thoroughly after cleaning the lter�
IAI Gas
PM2.5
Clean surface
of
lter and
long press
to reset.
Filter
cleaning completed.