Philips AC3858 - Filter Reset

35EN
1 Switch o the air purier and unplug from the power socket�
2 3 4 5 6
2 Pull the back cover and remove it from the appliance�
3 Pull the lter from the appliance�
4 Remove all packaging materials of the new lter�
5 Put the new lter into the appliance�
6 Reattach the back cover�
7 Put the plug of the air purier in the power socket�
8 Touch the button to switch on the appliance�
9 Touch and hold the lter status check/reset button
for 3 seconds to reset the lter lifetime counter�
10 Wash your hands thoroughly after replacing the
lter�
Note: Do not smell the lter as it has collected
pollutants from the air�
Filter reset
You can replace the lter even before lter replacement alert ( ) displays on
the screen� After replacing a lter, you need to reset the lter lifetime counter
manually�
1 Touch the power button for 3 seconds to turn o
the appliance and unplug from power socket�
2 Put the power plug in the power socket�
3 Within 15 seconds after power on, touch and hold
and button for 3 seconds to reset the lter
lifetime counter.
Filter has been replaced.
IAI Gas
PM2.5
3’
+