Philips AC6675 - Using the air purifier; Understanding the air quality light

34 EN
Most of the indoor air pollutants
fall under PM2.5 – which refers to
airborne particle pollutants smaller
than 2.5 micrometers. Common
indoor sources of ne particles are
tobacco smoke, cooking, burning
candles. Some airborne bacteria
and the smallest mold spores, pet
allergen and dust mite allergen
particles also fall under PM2.5.
PM2.5 level Air quality light color
≤12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red
IAI
The professional-grade AeraSense
sensor detects the level of indoor
air allergen and with numerical
feedback from 1 to 12 the potential
risk level of indoor air allergens can
be displayed. 1 indicates best air
quality.
IAI level Air quality light color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red
4 Using the air
purifier
Understanding the air
quality light
Air quality light
color
Air quality level
Blue Good
Blue-purple Fair
Purple-red
Poor
Red Very poor
The air quality light automatically
goes on when the air purier is
switched on, and lights up all colors
in sequence. After approximately
30 seconds, the air quality sensors
select the color that corresponds
to the surrounding air quality of
airborne particles.
The color of the air quality light is
determined by the highest level
among PM2.5, IAI and Gas readings.
PM2.5
AeraSense sensing technology
accurately detects and quickly
responds to even the slightest
particle change in the air. It provides
you with reassurance with real-time
PM2.5 feedback.