Philips AC6675 - Replacing the filters

English
43EN
1 Turn o the air purier and
unplug from the power socket.
2 Take out the pre-lters on both
sides of the appliance.
3 Take out the expired lters.
Discard used lters.
Note
• Do not touch the pleated lter
surface, or smell the lter as it
has collected pollutants from
the air.
4 Remove all packaging material of
the new lters.
Replacing the lters
Note
• The lters are not washable or
reusable.
• Always turn o the air purier
and unplug from the electrical
outlet before replacing the
lters.
• Do not clean the lters with a
vacuum.
• If the pre-lter is damaged, worn
or broken, do not use. Visit
www.philips.com/support or
contact the Consumer Care
Center in your country.
Filter alert light
status
Action
A3 displays
on the screen
and the lter
replacement
alert goes on.
Replace the
NanoProtect
lter Pro S3
(FY6177)