Philips AC6675 - Cleaning the Air Quality Sensor

40 EN
2 Clean the inlet and outlet of
the air quality sensor with a soft
brush.
3 Open the air quality sensor
cover.
4 Clean the air quality sensor, the
dust inlet and the dust outlet
with a damp cotton swab.
5 Dry all parts thoroughly with a
dry cotton swab.
3 Reattach the cover properly.
Cleaning the air quality
sensor
Clean the air quality sensor every
two months for optimal functioning
of the appliance.
Note
• If the air purier is used in a
dusty environment, it may need
to be cleaned more often.
• If the humidity level in the room
is very high, condensation may
develop on the air quality sensor
and the air quality light may
indicate a more poor air quality
even though the air quality is
actually good. If this occurs,
clean the air quality sensor or
use the air purier on a manual
speed setting.
1 Switch o the air purier and
unplug from the power socket.