Philips Aqua Plus 8000 Series - Page 10

12
English
MAX
50 °C
3 Fill the tank with water, ensuring the water temperature does not exceed
50°C.
10 ml
4 (Optional) If you wish to add a liquid floor cleaner into the aqua tank, opt for
a low-foaming or non-foaming variety that can be diluted. We recommend
the XV1792 Philips Floor Cleaner. Add only a few drops of the liquid cleaner
to the water.
5 Close the aqua tank properly.
6 Attach the prepared aqua tank to the aqua nozzle and you're set to begin.
Make sure the direction of the aqua tank is correct.
7 Press the on/off button to switch on the appliance. You can effectively clean
hard floors with the attached aqua module on the nozzle.