32
English
Signal Meaning of signal
i6 The adapter is not removed.
Remove the adapter before operating the appliance.
i7 A wrong adapter is used.
Only use the original adapter to charge the appliance.
i8 The filter is polluted.
Clean the filter. Follow the instructions on the screen or in the users manual.
You can buy new filters in the online Philips shop at
www.philips.com/support or at your Philips dealer.
i10 The battery is not properly inserted.
Remove the battery, and then put the battery back. If this does not work,
please take the appliance to a Philips service center or contact the Consumer
Care Center.
The battery level is low and needs to be charged. Charge the appliance or the
battery via the suggested charging method.
Troubleshooting
This chapter summarizes the most common problems you could encounter with
the appliance. If you are unable to solve the problem with the information
below, visit www.philips.com/support for a list of frequently asked questions
or contact the Consumer Care Center in your country.
Dry cleaning
Problem Possible cause Solution
The appliance does not
respond when the on/off
button is pushed.
The display shows the battery
empty icon.
To charge the battery, connect the
appliance to the charging station or attach
the handheld vacuum cleaner directly to
the power plug of the adapter.
The charging station is not
stable on the wall.
The screws holding the
charging station are loose.
Tighten the screws.
To Next Page
Loading...
