31
English
User interface signals and their meaning
Signal Meaning of signal
E1 Malfunction of the appliance.
Remove the battery, wait 10 seconds, and then put the battery back. If this
does not work, please take the appliance to a Philips service center or contact
the Consumer Care Center.
E2 The appliance is operated below the functioning temperature.
Move the appliance to a warmer room. Do not store, charge or use the
appliance at a temperature below 5 °C or above 40 °C.
E3 The appliance is operated above the functioning temperature.
Move the appliance to a cooler room. Do not store, charge or use the
appliance at a temperature below 5 °C or above 40 °C.
E5 The battery is damaged.
Take the appliance to a Philips service center or contact the Consumer Care
Center.
E9 The nozzle is operated above the functioning temperature.
Switch off the appliance and wait 15 minutes. Touch the upper housing of the
nozzle to feel if it is still warm. If the nozzle is still warm, wait longer for the
nozzle to cool down. Once the nozzle has cooled down, try switching the
appliance back on.
i4 The nozzle is clogged.
Make sure the appliance is switched off. Clean the nozzle according to the user
manual and check the tube by removing the tube from the main appliance.
Remove the object in the nozzle or tube and restart the appliance.
i5 Foreign object is stuck in the airflow passage.
Make sure the appliance is switched off. Clean the nozzle according to the user
manual and check the tube by removing the tube from the main appliance.
Remove the object in the nozzle, tube, or handheld and restart the appliance.
To Next Page
Loading...
