Philips BDP3020 User Manual

17EN
EN
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
1
After you have made all the necessary
connections, press [
Q (standby-on)] to
turn on the unit.
2
Turn on your TV.
3
Press the button on the TV’s remote
control that accesses the external input
channel. It may be labeled “SOURCE”,
“AV” or “SELECT” (refer to your TV’s
user manual). Or press “2” on the TV’s
remote control, then press channel
down button repeatedly until you see
the PHILIPS splash screen.
This is the correct viewing channel (external
input channel).
• If a certain amount of time has passed since
you turned on the unit, you may see the home
menu instead of the PHILIPS splash screen.
Home menu:
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
Introduction Connections Basic Setup Playback OthersFunction Setup

Philips BDP3020 Specifications

Picture and Display

picture enhancement	Progressive scan, Video upscaling, High Def (720p, 1080i, 1080p), Noise Reduction
aspect ratio	16:9, 4:3

Sound

sound system	Dolby Digital, DTS

Video Playback

playback media	CD-R/CD-RW, DVD-Video, DVDR/-RW, CD, DVD, BD Video, BD-R/RE 2.0, BDROM
compression formats	MPEG2, H.264, VC-1
video disc playback system	NTSC

Audio Playback

playback media	MP3-CD, CD-R/RW, CD, MP3-DVD
compression format	MP3, PCM, Dolby Digital, DTS
multichannel decoding	Dolby Digital

Still Picture Playback

playback media	CD-R/RW, DVD-R/-RW
picture compression format	JPEG
picture enhancement	Slideshow, Rotate, Zoom, High Definition Resolution

Connectivity

rear connections	Analog audio Left/Right out, Composite video (CVBS) output, HDMI output, Component Video output, Ethernet

Power

power supply	120V, 60Hz

Dimensions

set dimensions	360 x 50 x 215 mm