Philips BDP7500B2 - Page 52

4. InputallNdigitsbyremotecontrol,thenpress“Back”andthenpress“Enter”tosave
thesetting.

5. Ifsettingissavedsuccessfully,itwilldisplay“Pas”onscreen.Otherwise,itwilldisplay
“Fail”onscreen.If“fail”,confirmtheNdigitsinformationagain.(thisislikeapassword,
itfailedifweinputthewrongpassword)

6. Press“Stop”keyonremotecontroltogobacktheHOMEmenuagain,andthenpress
“5”“1”“7”“7”byremotecontroltoenteraspecialmenuwith6optionsagain.Use
“Up”and“Down”buttonbyremotecontroltoselectoption“[6]LaserCheck”


7. Ifthecableiswellconnectedandweldedprotectionpointisok,itwilldisplay“Passe”
onscreen.