Philips BTD2180 - Turn on Progressive Scan

13
English
EN
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinaryTVsystem).Withnearlydoublethe
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, make sure that:
• the TV supports progressive scan signals.
• you have connected the unit with the TV
through component video.
1 Turn on the TV.
2 Make sure that the TV progressive scan
mode is deactivated (see the TV user
manual).
3 Switch the TV to the correct viewing
channel for this unit.
4 Press SOURCE repeatedly to switch to
the disc source, and then press .
5 Select [Setup] -> [Video] -> [Progressive]
-> [On], and then press OK.
» The progressive setup is complete.