Philips BTD2180 - 6 Listen to the Radio; Tune to a Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually

19
English
EN
6 Listen to the
radio
Tune to a radio station
Tip
• Position the antenna as far as possible from TV, VCR, or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
1 Press SOURCE repeatedly to select the
FM source.
2 Press and hold / ( / )formore
than two seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
• Press / ( / )repeatedlyuntil
youndoptimalreception.
Program radio stations
automatically
Note
• You can program a maximum of 20 preset radio
stations(FM).
• In tuner mode, press and hold PROG
for more than two seconds to activate
automatic programming.
» [AUTO] is displayed.
» All available stations are programmed
in the order of waveband reception
strength,andtherstprogrammed
radio station is broadcast automatically.
Program radio stations
manually
1 Tune to a radio station.
2 Press PROG, and then press / to
select a number from 1–20.
3 Press PROGtoconrm.
» [SAVE] is displayed.
4 Repeat steps 2-3 to program more
stations.
Note
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
• In tuner mode, press PRESET +/- ( / )
(orpressanumerickeydirectly)toselect
a preset radio station.