Philips BTD2180 - 9 Product Information; Specifications

24 EN
9 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Maximum Output Power 70 W
Frequency Response 60 Hz - 16
kHZ; ±3 dB
Signal to Noise Ratio ≥70dB
Total Harmonic Distortion <1%
Aux Input 600 mV RMS
Speakers
Speaker Impedance 8 ohm
Speaker Driver 4”woofer +
20mm tweeter
Sensitivity >83 dB/m/W
Bluetooth
Bluetooth version V2.1 + EDR
Frequency band 2.4GHz ~ 2.48GHz ISM
Band
Range 10m(freespace)
Tuner (FM)
Tuning Range 87.5-108
MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
<45 dBf
Search Selectivity <30 dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >45 dB
USB
USB Direct Version 2.0 full speed
USB 5 V Power ≤500mA
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Video Decoding MPEG-1 / MPEG-2 / DivX
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N >57 dB
Audio DAC 24 Bits / 96 kHz
Total Harmonic
Distortion
<1%(1kHz)
Frequency
Response
4Hz-20kHz(44.1kHz)
4Hz-22kHz(48kHz)
4Hz-24kHz(96kHz)
Frequency
Response
60 Hz - 16 kHZ; ±3 dB
S/N Ratio >70 dBA
General information
AC power 100-240 V,
50/60 Hz
Operation Power
Consumption
28 W
Eco Standby Power
Consumption
<0.5 W