Philips C Series - IR Connection

55BDL6051C 65BDL6051C
15
Connect the [HDMI OUT] connector of DISPLAY 1 to the [HDMI IN] connector of DISPLAY 2.
PC
DISPLAY 1 DISPLAY 2
[HDMI IN]
[HDMI]
[HDMI OUT] [HDMI IN]
Connect the [DVI OUT] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2.
PC
DISPLAY 1 DISPLAY 2
[DVI IN]
[DVI]
[DVI OUT] [DVI IN]
3.5. IR connection
[IR IN]
External
IR Receiver
[IR IN]
[IR OUT]
DISPLAY 1 DISPLAY 2
[RS-232 OUT] [RS-232 IN]
DISPLAY 1 DISPLAY 2
NOTE:
1. The remote control sensor of this display will stop working if the [IR IN] is connected.
2. IR loop through connection can support up to 9 displays.
3. IR in daisy chain via RS232 connection can support up to 9 displays.