Setting the Clock (cont’d) 17
8
When the TV/VCR finds the clock data, the time will
appear on the screen. Press the STATUS/EXIT button.
6
Use the Number buttons to select your PBS station.
● If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen and you know another PBS channel, press the
PLAY/▲ button or the STOP/▼ button to choose
SELECT NEW PBS CH. Then, press the F.FWD/B but-
ton. Repeat step 6.
● If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen and you do not know another channel, press the
PLAY/▲ button or the STOP/▼ button to select SET PBS
CH. AUTO. Then, press the F.FWD/B button. The
TV/VCR will search for the PBS channel automatically.
• If the TV/VCR finds the PBS channel, the time will appear on the
screen.
• If the TV/VCR does not find the PBS channel, you will be
prompted to turn off the TV/VCR. Leave it off for several minutes.
When you turn on the TV/VCR again, the time will be set.
AUTO CLOCK (PBS) CH 02
TIME – – : – –
DATE – – / – – / – – – –
SELECT CHANNEL NUMBER
TO END PRESS EXIT
AUTO CLOCK (PBS) CH 12
TIME 06 : 30 PM
DATE 07 / 01 / 2001
SUNDAY
TO END PRESS EXIT
7
NOW SEARCHING flashes on the TV/VCR screen.
AUTO CLOCK (PBS) CH 12
TIME – – : – –
DATE – – / – – / – – – –
NOW SEARCHING
TO END PRESS EXIT
7
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page 11.
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 25.
Helpful Hints
Wait for the TV/VCR to
find the time.
5
Press the PLAY/▲ button or the STOP/▼ button to select
SET PBS CH. MANUAL. Then, press the F.FWD/B button.
6
8
5
9
When the clock is set, go to page 19 and set the TV/VCR
clock for your time zone. The channel that supplies the time
might be broadcasting from a different time zone. So, select your
Time Zone to ensure the TV/VCR clock is correct.
To Next Page
Loading...
