Philips CCC 090AT - S-Vhs Quasi Playback (Sqpb); Playing 29

Playing 29
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
PLAY/▲ button.
• Playback features and options are
on pages 38-42.
• When you play an S-VHS format
tape, you can not get the high reso-
lution that would be available on an
S-VHS VCR. Noise lines (black and
white streaks) may appear in the
picture.
• Playback is not possible if moisture
has condensed in the TV/VCR.
Details are on page 48.
Helpful Hints
Follow the steps below to play a tape.
1
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab is missing, playback should start automatically.
2
If playback does not start automatically, press the
PLAY/▲ button to start playback.
3
Press the STOP/▼ button to stop playback.
4
Press the REW(ind)/{ button to rewind the tape.
5
When the tape finishes rewinding, press the EJECT but-
ton to remove the tape.
1
4
5
2
3
Insert a tape in the TV/VCR.
S-VHS Quasi Play Back (SQPB)
SQPB allows you to view a tape recorded in S-VHS format. An
S-VHS format tape will play the same as a normal format tape.
This unit detects whether the tape is in S-VHS format or normal
format.