38 A-B Repeat Play
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE
TIME PLAY to ON, follow steps 2-3
above. Then, press the PLAY/o but-
ton or the STOP/p button to select
ONE TIME PLAY. Press the
F.FWD/B button so that ON
appears beside ONE TIME PLAY.
Then, press the STATUS/EXIT but-
ton.
• The end position (B) must be later
on the tape than the start position
(A).
Helpful Hints
Follow these steps to program the TV/VCR to play the material
between two specified points (A and B) on a tape over and over
again.
1
Insert a tape in the TV/VCR.
3
Press the PLAY/▲ button or the STOP/▼ button to select
VCR SETUP, then press the F.FWD/B button.
5
Press the F.FWD/B button repeatedly so that A-B
appears beside REPEAT PLAY.
4
Press the PLAY/▲ button or the STOP/▼ button to select
REPEAT PLAY.
2
Press the MENU button.
1
Insert a tape in the TV/VCR.
> PRIM. SETUP
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
PRESS B
VCR SETUP
> ONE TIME PLAY [ON]
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY [ON]
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY [A-B]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
3-5
2
To Next Page
Loading...
