Philips CE139DR - Clock Setting; Source Selection

11EN
Set the clock
1
Press and hold to access the system
menu.
2 Press / repeatedly until [CLOCK] is
displayed with time digits blinking.
3 Rotate anti-clockwise to set the hour.
4 Rotate clockwise to set the minute.
Tip
•
The system can automatically synchronize its clock
with an RDS station that transmits time signals (see
‘Synchronize the system clock’ on page 14).
Display the clock
Press and hold /DISP until [CLOCK] and
the set clock are displayed.
• To exit the clock display, press any button
or rotate
.
Select a source
Press AS/SOURCE repeatedly to select a
source.
• [DAB/DAB+]: When a DAB radio receiver
is connected, you can select this source to
listen to DAB radio stations.
• [RADIO]: Listen to FM/MW radio.
• [FRONT USB]/[REAR USB]: When a USB
storage device or compatible iPod/iPhone
is connected and recognized, you can
select this source to play audio les that
are stored on it.
• [SD/SDHC]: When an SD/SDHC card is
inserted and recognized, you can select this
source to play audio les that are stored
on it.
• [AUX IN]: Listen to the audio that is
transferred through the AUDIO-IN socket.
Select a listening zone
1
Press and hold until one of the
following options is displayed.
• [ALL]: For all passengers
• [FRONT-L]: For the front-left seat only
• [FRONT-R]: For the front-right seat
only
• [FRONT]: For front passengers only
2 Press / repeatedly to select a
listening zone.
Mute the button beep
The beep sound of buttons is enabled by
default.
1 Press and hold to access the system
menu.
2 Press / repeatedly until [BEEP ON]
or [BEEP OFF] is displayed.
• [BEEP ON]: Enable the beep sound of
buttons.
• [BEEP OFF]: Mute the beep sound of
buttons.
3 Rotate to change the setting.