Philips CE139DR - FM;MW Radio Operation; Tuner Sensitivity Adjustment; Radio Station Search; Storing Radio Stations

12 EN
5 Listen to FM/
MW radio
stations
Switch to FM/MW radio
mode
1
Press AS/SOURCE repeatedly to switch
the source to [RADIO].
2 Press / repeatedly to select a band:
FM1, FM2, FM3, MW1, or MW2.
Select a tuner region
You can select a radio region that matches your
location.
1 Press and hold to access the system
menu.
2 Press / repeatedly until one of the
following options is displayed.
• [AREA EUROPE] (Western Europe)
• [AREA ASIA] (Asia Pacic)
• [AREA M--EAST] (Middle East)
• [AREA AUST] (Australia)
• [AREA RUSSIA] (Russia)
• [AREA USA] (United States)
• [AREA LATIN] (Latin America)
• [AREA JAPAN] (Japan)
3 Rotate to select a region.
Select a tuner sensitivity
To search for radio stations with strong signals
only or more radio stations, you can change the
tuner sensitivity.
1 Press and hold to access the system
menu.
2 Press / repeatedly until [LOCAL
ON] or [LOCAL OFF] is displayed.
3 Rotate to select a setting.
• [LOCAL ON]: Search for radio
stations with strong signals only.
• [LOCAL OFF]: Search for radio
stations with strong and weak signals.
Search for a radio station
Search for a radio station
automatically
Press or to search for the previous or
next radio station with strong signals.
Search for a radio station manually
1 Press and hold or until the
frequency digits start change.
2 Press or repeatedly until the
target frequency is displayed.
Store radio stations in
memory
Note
•
You can store a maximum of six stations in each band.