32 EN
2 Tap or to select a preset sound
equalizer.
• [Custom], [Techno], [Rock], [Classic],
[Jazz], [Optimal], [Flat], or [Pop]
» The selected sound equalizer is
highlighted.
3 Tap on the circle or bar to adjust the
settings.
• [Bass]: bass range (-14 to +14)
• [Middle]: middle range (-14 to +14)
• [Treble]: treble range (-14 to +14)
• [LPF]: low pass lter range (60 Hz, 80
Hz, 100 Hz, or 160 Hz)
• [MPF]: middle pass lter range (0.5
kHz, 1.0 kHz, 1.5 kHz, or 2.5 kHz)
• [HPF]: high pass lter range (10.0 kHz,
12.5 kHz, 15.0 kHz, or 17.5 kHz)
•
: Tap and hold to restore the
settings.
4 Tap to exit.
Others
Tap on the playback interface.
» The setup interface is displayed.
• : Tap to display the [Music
zone] interface for selecting a listening
zone.
•
: Tap to display the [Fader/
Balance] interface for adjusting the
fader and balance.
•
: Tap to display the [SubWoofer]
interface for setting the sub-woofer.
Adjust the fader and balance
Tap or to adjust fader or balance value.
• [Fader]: fader range (+16 to -16).
• [Balance]: balance range (-16 to +16).
Set the sub-woofer
• [On]/[Off]: Tap to turn on or off the sub-
woofer.
•
/ : Tap to set the volume of sub-
woofer (0 dB to 14 dB).
• [80 Hz]/[120 Hz]/[160 Hz]: Tap to select a
low pass lter range for the sub-woofer.
Select a listening zone
Philips’ innovative Zone technology enables the
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create. You can switch the music listening zone
from the driver to passengers for the best
speaker sound settings in car.
To Next Page
Loading...
