Philips DC295 - Playing Audio; Playing from iPod;iPhone;iPad; Playing from External Devices

10EN
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone,
and iPad models:
Made for:
• iPod nano (7th generation)
• iPod touch (5th generation)
• iPhone 5
• iPad(4thgeneration)
• iPad Mini
Listen to the iPod/iPhone/iPad
1 Press SOURCE repeatedly to select dock
mode.
2 Press DOCK key to select dock source.
3 Place the iPhone/iPod/iPad into the dock.
• To pause/resume play, press OK/ .
• To skip to a track, press / .
• To search during play, press and hold
/ or PRESET +/PRESET -, then
release to resume normal play.
• To go back to the previous iPod/
iPhone menu, press MENU.
• To scroll through the menu, press
TUNING +/TUNING -.
• Toconrmaselection,pressOK/ .
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
• For certain iPod models, it may take up to a minute
before the charging indication appears.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press AUDIO IN to select the AUDIO IN
source.
2 Connect the MP3 link cable (not supplied)
to:
• the AUDIO IN jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
» Thescreenslideshows[AUDIOIN];
and show date and time.
3 Start to play the device (see the device
user manual).