Philips DC295 - Listening to the Radio; Tuning to Radio Stations; Manual Radio Station Programming; Automatic Radio Station Programming

11 EN
5 Listen to radio
Note
• Only FM radio reception is available on this unit.
Tune to a radio station
Tip
• Position the antenna as far as possible from TV, VCR or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
• [STEREO] is default setting for tuner mode.
• Under tuner mode, you can press OK repeatedly to
toggle between [STEREO] and [MONO], and the unit
memorizes your setting even if you turn off the unit or
turn to other sources.
1 Press SOURCE repeatedly to select FM
mode.
2 Press and hold TUNING +/TUNING - for
more than 3 seconds.
» The radio tunes to next station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press
TUNING +/TUNING - repeatedly
untilyoundoptimalreception.
Program radio stations
Radio station preset allows you to save radio
stations, and quickly tune to a favorite station.
Note
• The preset list can store up to 20 stations.
• If the preset list is fully occupied, the screen will show
PR 20.
• If saving a radio station to a position that has already
been occupied, the original radio station will be
replaced.
Program radio stations manually
1 Press SOURCE repeatedly to enter the
FM mode.
2 Press TUNING +/TUNING - to tune to a
radio station.
3 Press PROG/SCAN .
» Apresetlistpositionnumberashes.
4 Press OK to save current radio station to
the selected position.
Tip
• Press PRESET +/PRESET - to change the position to
save a radio station.
Program radio stations automatically
1 Press SOURCE repeatedly to enter the
FM mode.
2 Press and hold PROG/SCAN for at least
3 seconds.
» Thescreendisplays[AUTO](auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3 Waituntiltheautoscannishes.
» Therststationinthepresetlist
broadcasts automatically.
Select a preset radio station
1 Press / to select a preset number.