Philips DC295 - Set the Sleep Timer; Adjust Display Brightness; 7 Adjust Sound; Adjust Volume Level

13 EN
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 Press SLEEP repeatedly to select from 120,
90,60,45,30and15minutes.
» When the sleep timer is activated, the
display shows .
To deactivate sleep timer
1 Press SLEEPrepeatedlyuntil[OFF](off)is
displayed.
» The sleep timer is deactivated,
disappears on the display.
Adjust display brightness
1 Press BRIGHTNESS/REP ALM repeatedly
to select different levels of display
brightness.
7 Adjust sound
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level step by step.
Tip
• Press and hold VOL +/- to increase/decrease the
volume at faster speed.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
• [POP] (pop)
• [JAZZ] (jazz)
• [ROCK] (rock)
• [CLAS] (classic)
• [FLAT](at)
Note
• On the main unit, DSC and DBB are on the same
button.
Enhance bass
1 During play, press DBB to turn on or off
dynamic bass enhancement.
» IfDBBisactivated,[DBB]isdisplayed.