Philips DTM9030 - 5 Play Options; Pause;Resume Play; Stop Play; Skip to a Track

14 EN
5 Play options
Pause/resume play
• During play, press to pause/resume play.
Stop play
• During play, press to stop play.
Skip to a track
For CD:
• Press / to select another track.
• To select a track directly, press a key on
the numerical keypad.
For MP3 disc and USB:
1 Press ALBUM +/- / to select an
album or folder.
2 Press / to select a track or le.
Search within a track
1 During play, press and hold / to
search within a track.
2 Release to resume normal play.
Repeat and shufe play
1 During play, press MODE/MONO/
STEREO repeatedly to select:
• (repeat one): The current track is
played repeatedly.
• (repeat all): All tracks are played
repeatedly.
• (shufe): All tracks are played in a
random sequence.
2 To return to normal play, press
MODE/MONO/STEREO repeatedly until
repeat/shufe mode is no longer displayed.
Note
• The repeat and shufe play cannot be activated at the
same time.
• Shufe play cannot be selected when you play
programmed tracks.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, at the stop position,
press PROG/CLOCK SET to activate the
program mode.
» [PROG] (program) blinks on the
display.
2 For MP3/WMA tracks, press ALBUM +/-
/ to select an album.
3 Press / to select a track number, and
then press PROG/CLOCK SET to conrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Display ID3 information
• In disc mode, during play, press OK/INFO/
RDS to display the following information:
• Track number
• Play time
• Title name
• Artist name
• Album name