Philips DTM9030 - 6 Play from a Bluetooth Device

15
English
EN
6 Play from a
Bluetooth
device
Note
• Before you connect a Bluetooth-enabled device to the
unit, familiarize yourself with the Bluetooth capabilities
of the device.
• Keep the unit away from other electronic devices that
may cause interference.
• The effective operation range between the unit and the
paired device is approximately 10 meters (30 feet).
• Any obstacle between the unit and the device can
reduce the operational range.
1 Press PAIRING to select the Bluetooth
source.
» The Bluetooth indicator ashes blue.
2 Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3 Select ‘PHILIPS DTM9030’ on your device
for pairing.
» The Bluetooth indicator turns solid
blue.
» The unit beeps.
• For some devices, you may need to
input “0000” as the pairing password.
4 Start music play on your Bluetooth
enabled device.
Tip
• If the unit switches from Bluetooth source to other
sources, the connected Bluetooth device disconnects
automatically.
• The unit can memorize up to 8 previously connected
Bluetooth devices.
To disconnect the Bluetooth-enabled device:
• Deactivate Bluetooth on your device; or
• Move the device beyond the
communication range.
To clear Bluetooth pairing history:
• Press and holdBT SETUP on the main
speaker for 3 seconds.
» The current Bluetooth connection is
disconnected.
» After successful clearing, the Bluetooth
indicator ashes blue.
BT
0000
PIN
PHILIPS
DTM9030