Philips DTM9030 - Page 24

22 EN
3 Start play on the external audio player and
adjust volume.
» You can hear music from the unit.
4 Use the controls on your audio player to
control music play.
Connect through the OPTICAL
INorCOAXIAL INsocket:
1 Connect an optical or coaxial cable (not
supplied) to:
• the OPTICAL IN or COAXIAL
IN socket on the back of the main
speaker.
• the corresponding digital output socket
on an external audio device.
2 Press OPT/COAX repeatedly to select the
optical or coaxial audio input source.
3 Start play on the external audio player and
adjust volume.
» You can hear music from the unit.
4 Use the controls on your audio player to
control music play.
Tip
• In the optical or coaxial audio input mode, you can
adjust the audio delay time: 1) press MODE/MONO/
STEREO to enter audio delay adjustment; 2) press
VOL +/- to adjust the delay time between 00 ms and
200 ms.
Connect through the AUX IN (L/R)sockets:
1 Connect a pair of RCA audio cables (red/
white; not supplied) to:
• the AUX IN (L/R) sockets on the back
of the main speaker.
• the audio output sockets on an
external audio device.
2 Press AUDIO IN/AUX repeatedly to
select the RCA (red/white) audio input
(AUX) source.
3 Start play on the external audio player and
adjust volume.
» You can hear music from the unit.
4 Use the controls on your audio player to
control music play.