Philips DVDR3365 - Timer Recording (Manually)

English
29
Recording (continued)
Timer recording (manually)
A Turn on the TV power. Select the
correct Video In channel at the TV.
B Press TIMER on the remote control.
 The timer schedule list appears.
1
2
3
4
5
6
Source RecMode Date Start End
Timer Schedule
C Press OK on the remote control.
 The G-CODE
®
System menu appears.
Enter the G-CODE programming
number for the show you wish to
record or select CANCEL for manual
timer recording. To go back to timer
schedule press [TIMER].
D Select
CANCEL
in the menu and press OK.
 The timer editor menu appears.
Timer Editor
Rec Mode
Mode
Date
Start
End
2 Hour Mode
Once
Source
Ch003
31 / 01 / 05
10 : 33
11 : 03
OK
Cancel
OK
E Use ST keys to select an entry in the
menu and press X to enter its options.
About timer recording
Use ‘Timer Recording’ to automatically
start and stop a recording at a later date/
time. The DVD recorder will tune to the
right program channel and begin
recording at the speci ed time.
With this DVD recorder, you can pre-
program up to 20 recordings.
To make a timer recording, your
DVD recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The recording mode, see page 27.
TIMER
OK
TIPS: Ensure that there is suf cient space available on the DVD±R/±RW before recording.
You have to  nalize the DVD±R, before it can be played on other players, see page 35.
dvdr3365_75_eng_16752.indd 29dvdr3365_75_eng_16752.indd 29 2005-11-02 2:21:38 PM2005-11-02 2:21:38 PM