43EN
Recording
Playback EditingIntroduction Connections Basic Setup Function Setup Others
43EN
TIMER RECORDING
1
Press [TIMER].
2
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
1/1
MON FEB/19 11:30AM
Date Start End CH
New Program
3
Use [K / L] to enter the date, then
press [B].
Date
FEB/20
REC To Mode
HDD SP
SP 2h00m
Start
- - : - -
End
- - : - -
CH
DTV125. 1
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
You can program the unit to record up to 36 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• If you are recording to a disc, insert a recordable disc
with enough recordable space.
Note
• If you have not set the clock yet:
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 4 in “Manual Clock Setting” on page 31
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
Instructions continue on the next page.
Guide to Timer Programming Display
Timer Programming
1/1
SP (1:00)
FEB/20/07 10:30 AM 125.1 SP
Date Start End CH
FEB/20 10:30AM 11:30AM DTV125. 1
New Program
MON FEB/19 11:30AM
1
5
3
4
2
6
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (6 pages
maximum)
6 Recording media
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
HDD & DVD RECORDER
E2H40UD.indd 43E2H40UD.indd 43 2007/05/16 16:28:182007/05/16 16:28:18
To Next Page
Loading...
