Philips EasyKey DDL608-5HWS - Settings

8
4
5
Insert the connecting cables
into the sockets of the interior
assembly accordingly, and align
the square shaft with the hole
to ensure the interior assembly
is rmly attached to the inner
surface of the door, then secure
the top and bottom of the interior
assembly with M6 anchor screws.
Install 4pcs AAA batteries and
secure the battery cover with
screws. Then put the the interior
assembly cover on. Finally, check
whether each part is connected
and assembled in good condition.
Please cut the square shaft to a
proper length according to the door
thickness.
Pleaseensurethattheinterior
assemblycoverissecurelyfastened
sothatitdoesnotfallowhenthe
doorisclosed.
Attention
Attention