Philips EasyKey DDL709-FVP-7HWS - App Binding Guidance; Cloud Storage Usage Guide

14
③
③
④
⑤
⑥
Go back to the APP and follow the
prompt to finish the binding process.
App binding guidance
Cloud Storage Usage
Guide
Download
Add a door lock
Scan QR code
Manually adding the device
①
①
②
②
Please scan the QR code below to
download Philips EasyKey Plus APP on
your phone.
Open the Philips Easykey Plus app
and go to the "All Devices" or "Smart
Lock" tab on the homepage. Select the
corresponding model of your smart door
lock.
Tap on the "Check it out" or "Learn
more" button on the cloud storage
introduction page to learn more.
Copy and paste the URL: https://easykey.
conex-global.com into your browser to
enter the store.
Click on the "PROTECT PLANS" in the
navigation bar to access the purchase
page and select a desired subscription
plan.
Follow the on-screen prompts to make
the payment. After the payment is
completed, check your order payment
information and activation QR code via
email.
Return to the homepage, tap on the "+"
icon in the top right corner and scan the
activation QR code. Select the device you
want to use the subscription plan with
and click "Conrm".
1. After powering up the door lock, nd
the QR code on the back of the battery
cover.
2. Open the "Philips EasyKey Plus" APP,
and click [Add a Device] on the home
page.
3. After scanning the QR code on the
battery cover, follow the instructions of
the APP to complete the binding process.
1. Enter the "Philips EasyKey Plus" APP,
and click [Add a device] on the home
page.
2. Search for the current door lock model
and enter the binding process.
3. Press [*] twice on the lock, enter
the master PIN code, and press [#]
to conrm, then the door lock will
be in master mode. Press [4] to "Join
a network", and the voice prompts
"binding, please wait".
Attention
The door lock only supports 2.4G band Wi-Fi
routers (5G band is not supported). Please ensure
the distance between the router and the door lock
is less than 10 meters, otherwise the Wi-Fi signal
might be weak.
Philips Cloud Storage Service allows you
to store real-time recorded videos from
the door lock in the cloud, which can be
accessed for playback anytime via the cloud.
Here’s a guide to help you understand and
make the most of cloud storage(need to
bind the door lock in the app rst):