Philips EasyKey DDL709-FVP-7HWS - Eco Settings; Dual-Verification Mode; Infrared Handle; Network Configuration

13
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [4] to enter network conguration
and it will exit the master mode
automatically once the conguration is
done.
Press [2] to enter system settings, then press
[5] to enable/disable the infrared handle.
After the voice prompts the operation is
done, press [*] until you exit the master
mode.
Press [2] to enter system settings, then press
[3] to enter Eco settings.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [2] to enter system settings, then
press [4] to enable/disable dual-verication
mode. After the voice prompts the
operation is done, press [*] until you exit
the master mode.
Press [1] to turn on/o video; press [2] to
turn on/o facial recognition; press [3] for
sensor settings. After the voice prompts the
operation is done, press [*] until you exit
the master mode.
or or
Network conguration
Eco settings Infrared handle
Dual-verication mode
Join a network
Attention
Attention
Attention
The Eco mode is disabled by default.
The infrared handle is enabled by default.
The default verication mode is general mode.