Philips EasyKey DDL709-FVP-7HWS - Delete a User

12
1
Enter a new master PIN code and conrm
with [#]. Enter the new master PIN code
again and conrm with [#]. Once heard a
voice prompt of "succeeded", press [*] until
you exit master mode.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [2] to enter system settings, then press
[1] to enter language settings.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [2] to enter system settings, then press
[2] to enter volume settings.
Select the volume needed: press [1] for
higher volume; press [2] for lower volume;
press [3] for mute mode. After the setting is
done, press [*] to back to the previous menu
until you exit the master mode.
Select the language needed: for Chinese,
please press [1]; for English, please press
[2]. After the voice prompts "setting
succeeded", press [*] to return to the
previous menu until you exit the master
mode.
Press [1] to enter user settings, then press
[6] to delete user’s information.
Delete a user
Select the access methods that need to
delete: to delete a PIN code, please press [1];
to delete a ngerprint, please press [2]; to
delete a key tag, please press [3]; to delete a
Face ID, please press [4]; to delete all user's
information, please press [5], for the specic
access methods that need to delete, please
follow the voice prompt to operate. After
the voice prompts deletion succeeded,
press [*] to return to the previous menu
until you exit the master mode.
or or or or
or or
or
Settings
Language settings
Volume settings
Attention
Attention
The default language is English.
The default volume is higher volume.