Philips EasyKey DDL709-FVP-7HWS - Language Settings; Volume Settings

11
2
1
1
1
1
Add a one-time PIN code Add or change a master ngerprint
Modify master PIN code
Add a Face ID
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [1] to enter user settings, then press
[4] to add or change a master ngerprint.
Press [1] to enter user settings, then press
[2] to add a one-time PIN code.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [*] twice, enter the master PIN code,
and then press [#] to conrm.
Press [1] to enter user settings, then press
[5] to modify master PIN code.
Press [1] to enter user settings, then press
[3] to add a Face ID.
Position your face in front of the camera
and gently move your head in dierent
angles by following the voice prompt. After
hearing a voice prompt of “succeeded',
press [*] until you nally exit the master
mode.
Enter a 6-12 digits one-time PIN code, and
press [#] to conrm; enter the one-time PIN
code again, and conrm with [#]. After the
voice prompts"added succeeded", press [*]
to return to the previous menu until you
exit the master mode.
With no enrolled master ngerprint:
Enroll a new user ngerprint, and the
new ngerprint will be set as the master
ngerprint. After a voice prompt of
“succeeded”, press [*] to back to the
previous menu until you exit the master
mode.
With existed master ngerprint : Enter
a new user ngerprint, and the new
ngerprint will cover the old master
ngerprint. After a voice prompt of
“succeeded”, press [*] to back to the
previous menu until you exit the master
mode.