5
Left-hand swing Right-hand swing
Left-hand inswing
Left-hand outswing
Right-hand inswing
Right-hand outswing
Loosen the screws counterclockwise
with an Allen wrench and remove the
mortise plate.
Reattach the mortise plate on the
mortise and tighten the screws with
the Allen wrench.
Pull the latch straight out of mortise,
turn the latch 180 degrees, and
reinsert it into the mortise.
1
3
2
Notice before assembling
Adjustable latch instructions
This product applies to doors with four opening directions: left-hand inswing,
left-hand outswing, right-hand inswing, and right-hand outswing.
Attention
1. Choose a proper installation kit base on the door thickness.
2. The default tool kit applies to a door thickness of 60-90mm. Please consult the local distributor for other
door thicknesses.
Mortise plate
Latch
Mortise plate
Allen wrench
Allen wrench
To Next Page
Loading...
