15
English
MENUS
If the receiver is connected to a Philips CINEMA LINK TV
via the CINEMA LINK system control bus sockets
(see “CONNECTIONS”), you may use the TV to set up the
system. An option called RECEIVER will be added to the TV
menu.
If CINEMA LINK is on, adjustments on the receiver will be
shown on the TV screen for a few seconds. Consult the
instruction booklet of your TV on how to use the TV menu.
The options offered may vary by TV model.
Switching the connection
• Press CINEMA LINK to switch the connection between the
receiver and the TV either on or off.
yIf the connection is switched on, CINEMA LINK ON is
displayed.
Note: We recommend switching
CINEMA LINK
off during
recording. This avoids unwanted interruptions due to
switching TV functions.
If CINEMA LINK is switched on and the TV menu is active,
TV MENU is displayed and the menu and sound functions on
the receiver are locked.
TV menu
To Next Page
Loading...
